Adamite Rolls (AD)
Product Description
This grade is originally developed for roughing and intermediate rolling. Adamite rolls are steel base rolls having properties between those of cast iron rolls and high carbon cast steel rolls.
Carbon content of Adamite rolls varies between 1.2 to 2.2% with Ni, Cr and Mo as other alloying elements. The hardness of Adamite rolls can be controlled between 40 and 65 HSC by adjusting chemical composition and heat treatment process.
Unique characteristics are relatively high hardness while maintaining strength levels and toughness for operation requiring both wear resistance and mechanical strength. By means of forced cooling, this grade can reach up to 65 HSC surface hardness
| MATERIAL |
GRADE |
CHEMISTRY |
BARREL HARDNESS |
| C |
Si |
Mn |
Cr |
Ni |
Mo |
(HSD) |
| Adamite |
AD135 |
1.30-1.50 |
0.30-0.60 |
0.70-1.40 |
0.80-1.60 |
|
0.20-0.60 |
38-55 |
| AD140 |
1.30-1.50 |
0.30-0.60 |
0.70-1.10 |
0.80-1.20 |
0.50-1.20 |
0.20-0.60 |
35-50 |
| AD150 |
1.50-1.70 |
0.30-0.60 |
0.70-1.10 |
0.80-1.20 |
|
0.20-0.60 |
40-50 |
| AD160 |
1.50-1.70 |
0.30-0.60 |
0.80-1.30 |
0.80-2.00 |
≥0.20 |
0.20-0.60 |
40-60 |
| AD180 |
1.70-1.90 |
0.30-0.80 |
0.60-1.10 |
0.80-1.50 |
0.50-2.00 |
0.20-0.60 |
45-60 |
| AD190 |
1.80-2.00 |
0.30-0.80 |
0.60-1.20 |
1.50-3.50 |
1.00-2.00 |
0.20-0.60 |
55-65 |
| AD200 |
1.90-2.10 |
0.30-0.80 |
0.80-1.20 |
0.60-2.00 |
0.60-2.50 |
0.20-0.80 |
50-65 |
Our Advantages
Seawoo Roll assures high quality products through an extensive system of quality controls. A number of rigid inspections are carried out for each and every step in the process of our production line. Every set of inspection equipment has to go through high accuracy calibration to guarantee effectiveness of inspection data.
• Scrap and other raw materials are verified so that they meet stringent specifications.
• All melting parameters are analyzed.
• Casting parameters are documented.
• Heating parameters are monitored during the heat treatment process.
• Hardness and internal soundness are checked after the heat treatment process has been carried out.
• Dimensions and final hardness results are checked before shipment.
• An examination to detect freedom of surface and internal cracks is carried out before shipment.
• All results are documented in accordance with our Quality Management System.
Detailed Photos
Product Application
| LONG PRODUCT (LP) MILL ROLLS |
| MILL TYPE |
ROLL TYPE |
ROLL GRADE |
| BAR MILL |
Roughing, Intermediate,Finishing |
Cast Steel, Adamite Steel, Nodular lron, HSSTC in ring roll form |
| WIRE ROD MILL |
Roughing,intermediate,Finishing, Finishing Block |
Cast Steel, Adamite Steel Nodular lron, HSSCemented Carbide |
| SECTION MILL |
Breakdown. RoughingIntermediate, Finishing |
Cast Steel, Adamite Steel, Graphitic SteelNodular lron |
| HEAVY SECTION MILL |
Breakdown,Roughing, Edger,Tandem, UF, UR, Straightening |
Cast Steel, Adamite Steel, Graphitic SteelHiCr lron, HiCr Steel, Forged Steel |
| FLAT PRODUCT (FP) MILL ROLLS |
| MILL TYPE |
ROLL TYPE |
ROLL GRADE |
| HSM, Plate |
Roughing WR |
Special Alloy Cast Steel, HiCrSteel SemiHSS |
| HSM |
Roughing & Finishing BUR |
Duplex Cast Steel, Forged Stee! |
| HSM |
F1-F4, F5-F7 WR |
Hi Cr lron, ICDP HSS |
| CSM |
Tandem, Reversible,Sendzimir WR |
Cr3, Cr4, Cr5 Forged Steel |
| CSM |
BUR |
Cr3, Cr4, Cr5 Forged Steel/Duplex Cast Steel |
Audited Supplier 
){kind=link}